3M double-sided
Your current location:Product >> 3M double-sided >> Browse
Product
Introduction
3M9495LE double-sided adhesive is a PET-based double-sided adhesive in 3M double-sided adhesive. It belongs to 3M's 300LSE series of double-sided adhesive. It is made of transparent PET double-coated acrylic adhesive.
Specifications: 1372MM * 55M * 0.17MMT, with good dimensional stability, thermal stability, chemical stability, good moisture resistance, initial tack and holding viscosity, easy die cutting processing, good adhesion to plastic, rubber, nameplate ; Can be applied to a wider temperature range and harsh environment; release paper is polymer-coated moisture-proof kraft paper, which does not wrinkle under high humidity conditions; long-term temperature resistance of 93 ° C, short-term temperature resistance of 149 ° C
Under the condition of 21 ° C and 50% relative humidity, the storage period in the original packaging state is 24 months from the date of production.
The bonding strength increases with the increase of the contact area between the adhesive and the adhered surface. The application of a stable pressure helps the adhesive to contact the adhered surface, thereby increasing the adhesive strength.
To achieve the best bonding effect, the bonding surface must be clean and dry. The optimal temperature range for the application of the tape is 21-38 ° C. It is recommended that the initial bonding temperature is lower than 10 ° C, which is not suitable for bonding, so The adhesive at this time is too hard to adhere firmly to the object; however, if it is already attached, the holding force at low temperature is also satisfactory.
3M9495LE double-sided adhesive meets the requirements of ROHS regulations in terms of environmental protection. It is suitable for the bonding of nameplates, panels, decorations, and decorative parts. Even on painted surfaces, it has strong adhesion.
